1.5.0版本readme更新

README.md

@@ -24,9 +24,7 @@
 
 | 版本 | 主题 | 状态 |
 | :--- | :--- | :--- |
-| 1.4.0 | SAF 权限改造 | ✅ 已发布 |
-| 1.4.5 | 魅族20系补充适配调整 | ✅ 已发布 |
-| 1.5.0 | 功率计算优化 | 📋 规划中 |
+| 1.5.0 | 功率计算优化 | ✅ 已发布 |
 | 2.0.0 | 数据看板扩展（月/季/年趋势） | 📋 远景 |
 
 ---
@@ -35,7 +33,7 @@
 
 - Flutter SDK: ^3.9.2
 - Android: 8.0+ (API 26+)
-- 仅支持魅族手机（15 系列 ~ 25 系列）
+- 仅支持魅族手机（15 系列 ~ 22 系列）
 
 ---
 
@@ -49,4 +47,5 @@ flutter pub get
 flutter run
 
 # Release APK
-flutter build apk --release
+flutter build apk --release --target-platform android-arm64
+```

lib/logic/capacity_extractor.dart

@@ -1,31 +1,36 @@
 /// 容量提取工具
 /// 支持两种日志格式：
 /// 1. learned_cap（21 系列）：单位 µAh，除以 1000 得到 mAh
-/// 2. remaining_cap（20 系列）：单位 mAh，直接使用（但 21 系列的 remaining_cap 也是 µAh，需判断）
-///
-/// 🟢 1.4.5 优化：仅从 status=Full 的行中提取容量（充满状态下 BMS 最准确）
+///    🟢 优先级最高，不受 status 限制（BMS 可能在任意状态行更新此值）
+/// 2. remaining_cap（20 系列）：仅从 status=Full 行提取，单位智能识别（µAh/mAh）
 class CapacityExtractor {
   static int? extractCapacity(List<String> lines) {
-    // 🟢 只保留包含 tbat= 且 status=Full 的行
-    final fullLines = lines.where((line) {
-      return line.contains('tbat=') && line.contains('status=Full');
-    }).toList();
+    final validLines = lines.where((line) => line.contains('tbat=')).toList();
+    if (validLines.isEmpty) return null;
 
-    if (fullLines.isEmpty) {
-      // 今天没有充满电的记录，返回 null 表示无有效数据
-      return null;
-    }
-
-    // 模式一：learned_cap（21 系列）
+    // ============================================================
+    // 🟢 第一优先级：learned_cap（21 系列专属）
+    // 不限制 status，在所有有效行中搜索，取最新的一条
+    // ============================================================
     final learnedReg = RegExp(r'learned_cap=(\d+)');
-    for (String line in fullLines.reversed) {
+    for (String line in validLines.reversed) {
       final match = learnedReg.firstMatch(line);
       if (match != null) {
-        return int.parse(match.group(1)!) ~/ 1000;
+        final value = int.parse(match.group(1)!);
+        // learned_cap 单位固定为 µAh，直接除以 1000 转 mAh
+        return value ~/ 1000;
       }
     }
 
-    // 模式二：remaining_cap 最大值（20 系列，或 21 系列回退）
+    // ============================================================
+    // 🟢 第二优先级：remaining_cap（20 系列回退方案）
+    // 仅从 status=Full 行提取（充满状态下 BMS 最准确）
+    // ============================================================
+    final fullLines = validLines
+        .where((line) => line.contains('status=Full'))
+        .toList();
+    if (fullLines.isEmpty) return null;
+
     final remainingReg = RegExp(r'remaining_cap=(\d+)');
     int? maxRemaining;
     for (String line in fullLines) {
@@ -39,7 +44,7 @@ class CapacityExtractor {
     }
     if (maxRemaining == null) return null;
 
-    // 🟢 判断单位：如果数值大于 100000（约 100 mAh），则认为是 µAh，需除以 1000
+    // 🟢 智能单位识别：如果数值大于 100000（约 100 mAh），视为 µAh 需除以 1000
     if (maxRemaining > 100000) {
       return maxRemaining ~/ 1000;
     } else {

lib/logic/charge_parser.dart

@@ -38,8 +38,9 @@ class ChargeParser {
     final result = <Map<String, dynamic>>[];
     for (String line in lines) {
       final timestamp = TimeUtils.parseLogTimestamp(line);
-      if (!TimeUtils.isLogTimestampValid(timestamp, chargingStartTime))
+      if (!TimeUtils.isLogTimestampValid(timestamp, chargingStartTime)) {
         continue;
+      }
 
       final isUsb =
           line.contains('chg_usb') &&
@@ -101,7 +102,7 @@ class ChargeParser {
     return ParseResult(
       isWireless: false,
       chargeType: chargeType,
-      power: (vbus * ibus) / 1000000000.0,
+      power: (vbus * ibus) / 1000000000000.0,
       volt: vbus / 1000000.0,
       curr: ibus / 1000000.0,
       wiredLevel: chargeType == 'PPS' ? level : null,

lib/pages/battery_health_page.dart

@@ -2,9 +2,7 @@ import 'dart:async';
 import 'dart:developer' as dev;
 import 'package:flutter/material.dart';
 import 'package:flutter/services.dart';
-import 'package:flutter_svg/flutter_svg.dart';
 import 'package:device_info_plus/device_info_plus.dart';
-import 'package:shared_preferences/shared_preferences.dart';
 
 // 检查这些导入是否正确
 import '../models/device_matching.dart'; // ✅ 存在
@@ -322,10 +320,7 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
 
   // ---------- 读取当前数据 ----------
   Future<void> readBatteryCapacity() async {
-    dev.log(
-      '🔵 ========== readBatteryCapacity 开始 ==========',
-      name: 'BatteryHealth',
-    );
+    dev.log('🔴🔴🔴 readBatteryCapacity 被调用了 🔴🔴🔴', name: 'BatteryHealth');
 
     _safState = await _safService.getPermissionState();
     dev.log('🔵 SAF状态: $_safState', name: 'BatteryHealth');
@@ -354,6 +349,10 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
           _currentCap = recent.first['capacity'].toDouble();
           _maxVolt = recent.first['volt_max'] ?? 0;
           _minVolt = recent.first['volt_min'] ?? 0;
+          // 🟢 数据库目前不存温度，后续升级可扩展，暂时保留为 0
+          _maxTemp = 0;
+          _minTemp = 0;
+          _cycleCount = 0;
           _hasData = true;
         });
         await _updateTrendChart();
@@ -380,20 +379,7 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
         return;
       }
 
-      // 使用 CapacityExtractor 提取容量
-      final cap = CapacityExtractor.extractCapacity(lines);
-      if (cap == null) {
-        dev.log(
-          '🔵 未找到容量数据（learned_cap 或 remaining_cap）',
-          name: 'BatteryHealth',
-        );
-        setState(() => _hasData = false);
-        _chargeAnimationController.reset();
-        _updateChargeState();
-        return;
-      }
-
-      // 提取最后一条有效数据用于显示
+      // 🟢 提取所有有效行（包含 tbat=）
       final validLines = lines.where((line) => line.contains('tbat=')).toList();
       if (validLines.isEmpty) {
         dev.log('🔵 无有效数据行', name: 'BatteryHealth');
@@ -403,6 +389,8 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
         return;
       }
 
+      // 🟢 1.4.7 核心改动：字段提取与容量提取解耦
+      // 无论 cap 是否为 null，都提取常规字段
       final lastLine = validLines.last;
       final cycle = _extractCycle(lastLine);
       final temp = _extractTemp(lastLine);
@@ -411,12 +399,34 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
       final (maxVolt, minVolt) = _extractVoltExtremes(validLines);
 
       dev.log(
-        '🔵 解析结果: cap=$cap, cycle=$cycle, temp=$temp, volt=$volt',
+        '🔵 字段提取: cycle=$cycle, temp=$temp, volt=$volt',
         name: 'BatteryHealth',
       );
 
+      // 🟢 容量提取（可能为 null）
+      final cap = CapacityExtractor.extractCapacity(lines);
+      int? finalCap;
+
+      if (cap != null) {
+        // ✅ 今日有充满记录，直接使用
+        finalCap = cap;
+        dev.log('🔵 从日志提取容量: $cap', name: 'BatteryHealth');
+      } else {
+        // ⚠️ 今日无充满记录，尝试从数据库复制前一天容量
+        dev.log('🔵 今日无充满记录，尝试复制前一天容量', name: 'BatteryHealth');
+        final recent = await _dbService.queryRecentData(1);
+        if (recent.isNotEmpty) {
+          finalCap = recent.first['capacity'] as int;
+          dev.log('🔵 复制前一天容量: $finalCap', name: 'BatteryHealth');
+        } else {
+          finalCap = null;
+          dev.log('🔵 无历史数据可复制', name: 'BatteryHealth');
+        }
+      }
+
+      // 🟢 一次性 setState 更新所有字段
       setState(() {
-        _currentCap = cap.toDouble();
+        _currentCap = (finalCap ?? _currentCap).toDouble();
         _cycleCount = cycle;
         _batteryTemp = temp;
         _batteryVolt = volt;
@@ -603,7 +613,8 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
     if (_isWireless) {
       return ChargeUtils.getDisplayPowerWireless(_chargePower);
     } else {
-      return ChargeUtils.getDisplayPowerWired(
+      // 🟢 1.5.0 改用新格式：实际/标定
+      return ChargeUtils.getMainDisplayPowerWired(
         _chargePower,
         _wiredLevel,
         _chargeType,
@@ -620,7 +631,8 @@ class _BatteryHealthPageState extends State<BatteryHealthPage>
   Widget build(BuildContext context) {
     return AnnotatedRegion<SystemUiOverlayStyle>(
       value: const SystemUiOverlayStyle(
-        statusBarColor: Colors.white,
+        // 🟢 1.5.0 统一状态栏颜色
+        statusBarColor: Color.fromRGBO(157, 212, 237, 0.1),
         statusBarIconBrightness: Brightness.dark,
         statusBarBrightness: Brightness.dark,
       ),

lib/utils/charge_utils.dart

@@ -1,6 +1,7 @@
 import '../constants/charge_maps.dart';
 
 class ChargeUtils {
+  // ============ 无线充电（保持不变） ============
   static String getDisplayPowerWireless(double power) {
     if (power == 0) return '读取中...';
     const List<int> levels = [5, 7, 15, 27, 40, 50, 66];
@@ -12,21 +13,17 @@ class ChargeUtils {
     return '≈${matchedLevel}W';
   }
 
+  // ============ 原有有线逻辑（保留兼容，但主界面不再直接调用） ============
   static String getDisplayPowerWired(
     double power,
     int? wiredLevel,
     String chargeType,
   ) {
-    // USB 慢充锁定 7.5W
     if (chargeType == "SDP") return "≈7.5W";
-
-    // 🟢 优先使用 wiredLevel 精确匹配
     if (wiredLevel != null && ChargeMaps.wiredPower.containsKey(wiredLevel)) {
       double p = ChargeMaps.wiredPower[wiredLevel]!;
       if (p > 0) return '≈${p.toInt()}W';
     }
-
-    // 🟢 匹配阈值收窄到 ±3W，减少跳变
     double best = 0;
     for (var entry in ChargeMaps.wiredPower.entries) {
       if (entry.value <= power + 3 && entry.value > best) {
@@ -37,11 +34,61 @@ class ChargeUtils {
     return best > 0 ? '≈${best.toInt()}W' : '≈${power.round()}W';
   }
 
+  // ============ 🟢 1.5.0 新增：主界面显示（实际/标定） ============
+  /// 示例：≈30w/65w
+  static String getMainDisplayPowerWired(
+    double power,
+    int? wiredLevel,
+    String chargeType,
+  ) {
+    // USB 慢充锁定 7.5W
+    if (chargeType == "SDP") return "≈7.5w";
+
+    if (power == 0) return "读取中...";
+
+    final actual = power.round();
+
+    // 有档位且能查到标定值
+    if (wiredLevel != null && ChargeMaps.wiredPower.containsKey(wiredLevel)) {
+      final requested = ChargeMaps.wiredPower[wiredLevel]!.round();
+      return "≈${actual}w/${requested}w";
+    }
+
+    // 无档位信息，仅显示实际功率
+    return "≈${actual}w";
+  }
+
+  // ============ 🟢 1.5.0 新增：二级页面标定档位显示 ============
+  /// 示例：≈80w/L-10
+  static String getDetailRequestedPowerWired(
+    double power,
+    int? wiredLevel,
+    String chargeType,
+  ) {
+    if (chargeType == "SDP") return "≈7.5w";
+
+    if (power == 0) return "读取中...";
+
+    if (wiredLevel != null && ChargeMaps.wiredPower.containsKey(wiredLevel)) {
+      final requested = ChargeMaps.wiredPower[wiredLevel]!.round();
+      return "≈${requested}w/L-$wiredLevel";
+    }
+
+    return "≈${power.round()}w";
+  }
+
+  // ============ 🟢 1.5.0 新增：二级页面实际功率显示 ============
+  static String getDetailActualPowerWired(double power, String chargeType) {
+    if (chargeType == "SDP") return "≈7.5w";
+    if (power == 0) return "读取中...";
+    return "≈${power.round()}w";
+  }
+
+  // ============ 充电类型标签（保持不变） ============
   static String getChargeTypeLabel(bool isWireless, String chargeType) {
     if (isWireless) {
       return chargeType == "无线" ? "无线" : chargeType;
     }
-    // 🟢 空类型显示"识别中..."，比"等待log信息"更友好
     if (chargeType.isEmpty) {
       return "识别中...";
     }

lib/utils/time_utils.dart

@@ -1,5 +1,3 @@
-import 'dart:developer' as dev;
-
 class TimeUtils {
   /// 解析日志行中的时间戳，强制解析为 UTC
   static DateTime? parseLogTimestamp(String line) {

lib/widgets/charge_detail_page.dart

@@ -1,4 +1,5 @@
 import 'package:flutter/material.dart';
+import 'package:flutter/services.dart';
 import '../utils/charge_utils.dart';
 
 /// 充电详情页
@@ -20,14 +21,6 @@ class ChargeDetailPage extends StatelessWidget {
     this.wiredLevel,
   }) : super(key: key);
 
-  String _getDisplayPower() {
-    if (isWireless) {
-      return ChargeUtils.getDisplayPowerWireless(power);
-    } else {
-      return ChargeUtils.getDisplayPowerWired(power, wiredLevel, chargeType);
-    }
-  }
-
   String _getProtocolDisplay() {
     if (isWireless) return '无线充电（$chargeType）';
     if (chargeType == 'PPS') return 'PPS 快充';
@@ -35,41 +28,80 @@ class ChargeDetailPage extends StatelessWidget {
     return chargeType;
   }
 
+  String _getRequestedDisplay() {
+    return ChargeUtils.getDetailRequestedPowerWired(
+      power,
+      wiredLevel,
+      chargeType,
+    );
+  }
+
+  String _getActualDisplay() {
+    return ChargeUtils.getDetailActualPowerWired(power, chargeType);
+  }
+
   @override
   Widget build(BuildContext context) {
-    return Scaffold(
-      appBar: AppBar(
-        title: const Text('充电详情'),
-        backgroundColor: const Color.fromARGB(0, 255, 255, 255),
-        elevation: 0,
-        foregroundColor: Colors.black,
-        iconTheme: const IconThemeData(color: Colors.black),
+    return AnnotatedRegion<SystemUiOverlayStyle>(
+      // 🟢 1.5.0 与主界面统一状态栏样式
+      value: const SystemUiOverlayStyle(
+        statusBarColor: Color.fromRGBO(157, 212, 237, 0.5),
+        statusBarIconBrightness: Brightness.dark,
+        statusBarBrightness: Brightness.dark,
       ),
-      body: Padding(
-        padding: const EdgeInsets.all(20.0),
-        child: Column(
-          crossAxisAlignment: CrossAxisAlignment.start,
-          children: [
-            _buildDetailRow('协议', _getProtocolDisplay()),
-            const Divider(),
-            _buildDetailRow('功率', _getDisplayPower()),
-            const Divider(),
-            _buildDetailRow('电压', '${volt.toStringAsFixed(2)}V'),
-            const Divider(),
-            _buildDetailRow('电流', '${curr.toStringAsFixed(2)}A'),
-            const Divider(),
-            if (!isWireless && wiredLevel != null)
-              _buildDetailRow('档位', '$wiredLevel'),
-            if (!isWireless && wiredLevel == null) _buildDetailRow('档位', '自动'),
-            if (isWireless) _buildDetailRow('类型', '无线'),
-            const Spacer(),
-            Center(
-              child: Text(
-                '数据来自 BMS 实时日志',
-                style: TextStyle(fontSize: 12, color: Colors.grey.shade500),
+      child: Scaffold(
+        backgroundColor: Colors.white,
+        appBar: AppBar(
+          title: const Text('充电详情'),
+          backgroundColor: Colors.white, // 🟢 与主界面统一
+          elevation: 0,
+          scrolledUnderElevation: 0,
+          shadowColor: Colors.transparent,
+          surfaceTintColor: Colors.transparent,
+          foregroundColor: Colors.black,
+          iconTheme: const IconThemeData(color: Colors.black),
+        ),
+        body: Padding(
+          padding: const EdgeInsets.all(20.0),
+          child: Column(
+            crossAxisAlignment: CrossAxisAlignment.start,
+            children: [
+              _buildDetailRow('协议', _getProtocolDisplay()),
+              const Divider(),
+
+              // 有线充电：标定档位 + 实际功率
+              if (!isWireless) ...[
+                _buildDetailRow('标定档位', _getRequestedDisplay()),
+                const Divider(),
+                _buildDetailRow('实际功率', _getActualDisplay()),
+                const Divider(),
+              ] else ...[
+                _buildDetailRow(
+                  '功率',
+                  ChargeUtils.getDisplayPowerWireless(power),
+                ),
+                const Divider(),
+              ],
+
+              _buildDetailRow('电压', '${volt.toStringAsFixed(2)}V'),
+              const Divider(),
+              _buildDetailRow('电流', '${curr.toStringAsFixed(2)}A'),
+              const Divider(),
+
+              // 辅助信息
+              if (isWireless) _buildDetailRow('类型', '无线'),
+              if (!isWireless && wiredLevel == null)
+                _buildDetailRow('档位', '自动'),
+
+              const Spacer(),
+              Center(
+                child: Text(
+                  '数据来自 BMS 实时日志',
+                  style: TextStyle(fontSize: 12, color: Colors.grey.shade500),
+                ),
               ),
-            ),
-          ],
+            ],
+          ),
         ),
       ),
     );

pubspec.yaml

@@ -16,7 +16,7 @@ publish_to: 'none' # Remove this line if you wish to publish to pub.dev
 # https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html
 # In Windows, build-name is used as the major, minor, and patch parts
 # of the product and file versions while build-number is used as the build suffix.
-version: 1.4.0
+version: 1.5.0
 
 environment:
   sdk: ^3.9.2